Any boater will encounter rough water on occasion, which means knowing how to trim a boat is an important skill. Your boating adventures will be safer and more comfortable when you can properly use your trim tabs to accommodate changes in conditions.
If you are a new boat owner learning to boating, don’t forget to register your boat. You should also consider bringing an experienced boater on your first few trips.
To get a basic understanding of trimming a boat in rough water, there are a few general guidelines to follow. These guidelines apply to hulled motor boats, such as center consoles or cruisers with trailers, that are up to 30 feet long.
- Always work at a safe pace. The first thing to remember when trimming a motorboat in chop is to use the throttle conservatively.
- Whenever you learn how to trim a boat in rough water, you will need to lower your trim tabs using the trim tab switch on the rudder. The trim tabs are lowered to bring the bow down when working more slowly in rough water. As the trim tabs are lowered, you will find that the hull of your boat begins to go shallower with the increased wetted surface area.
- There is no specific rule on how to trim a boat or adjust the trim tabs in a particular situation. As you gain experience on the water, it will be easier to tell when your trim tabs have been lowered to the best position for the conditions and weight distribution on board.
- Pay close attention to the feel of the boat when adjusting the trim tabs. The goal is to match engine trim, trim tabs and speed to each other in order to experience the most comfortable ride.
You now know more about how to trim a boat in choppy conditions, but do you know the most important boat terms? Use the boat glossary to review any terms that may have confused you.